 |
Dual Angle Wood Coin Displays |
| for Military Challenge Coins and Geocoins |
Dual Angle wood coin displays have a large frontal area suitable for an engraved plate.
There is a slight angle built into the coin display area to help keep coins in the back of the display more visible than flat coin displays allow.
Each coin display is handcrafted from pieces ofsolid hardwood stock and is available in your choice of three finishes.
Display slots are sized to fit standard coins. Coins that are thicker than normal (those with lacquer finishes) and coins kept in plastic cases require thicker slots. CrafterOfWood is pleased to make such modifications at no additional cost.
Please include this request in your order and tell us how many slots to make standard and how many over sized.
Though these orders incur no additional cost, additional time may be required (generally, one to two weeks.) Please email us before your order if this is an issue.
Dual Angle wood coin displays are approximately 4.5 inches front to back and 3.5 inches high.
The front of the display has space for an engraved plate (not included) up to 2-1/4 inches high.
 |
 |
| DA412
in
Oak
(12inches
wide) |
DA416
in
Oak
(16
inches
wide) |
| Holds
24
standard
1-3/4"
coins |
Holds
36
standard
1-3/4"
coins |
| $40 in
Oak |
$48 in
Oak |
|
|
Dual
Angle
Flush
Mount wood
coin displays are also approximately4.5 inches front to back and 3.5
inches high
The front of the wood coin display has space for an engraved plate (not included) up to 4 inches wide by 2-1/4 inches high.
The front of the wood coin display has space for an engraved plate (not included) up to 4 inches wide by 2-1/4 inches high.
 |
 |
| DF412
in
Oak
(12
inches
wide) |
DF416
in
Oak
(16
inches
wide) |
| Holds
24 standard 1-3/4" coins
plus 4 in flush mounts |
Holds 36 standard 1-3/4" coins plus 6 in flush mounts |
| $48 in
Oak |
$57 in
Oak |
|
|
The back of all Dual Angle wood coin displays and Dual Angle Flush Mount coin displays are open allowing room for storage underneath.
Challenge Coins / Geocoins are not included.
More products coming.
Please check back.
All photos and designs are owned by Brad Hancock