 |
Single Angle Displays |
| for Military Challenge Coins and Geocoins |
The angle built into these coin displays ensures that all of your coins
can be seen and coins in back are not blocked from view by coins in front.
All of our coin displays are handcrafted from select pieces of
solid hardwood and are available in your choice of three finishes.
Display slots are sized to fit standard coins. Coins that are thicker than
normal (those with lacquer finishes) and coins kept in plastic cases require
thicker slots. CrafterOfWood is pleased to make such modifications at no
additional cost. Please include this request in your order and tell us how
many slots to make standard and how many over sized. Though these orders
incur no additional cost, additional time may be required (generally,
one to two weeks.) Please email us before your order if this is an issue.
See some previously made custom items.
The Single Angle wood coin display is approximately
6 inches front to back and 3.5 inches high.
These coin displays have space for an
engraved plate (not included).
 |
|
||
| SA512 in Oak (12 inches wide) | SA516 in Oak (16 inches wide) | ||
| Holds 30 standard 1-3/4" coins | Holds 45 standard 1-3/4" coins | ||
| $29 in Oak | $34 in Oak | ||
|
|
The Single Angle Flush Mount wood coin display is approximately
6 inches front to back and 3.5 inches high.
 |
 |
||
| SF412
in
Oak
(12
inches wide) |
SF416 in Oak (16 inches wide) | ||
| Holds
24 standard 1-3/4"
coins plus 4 in flush mounts Due to limited demand, these are stocked in limited quantities and may require additional processing time. |
Holds
36 standard 1-3/4"
coins plus 6 in flush mounts Due to limited demand, these are stocked in limited quantities and may require additional processing time. |
||
| $37 in Oak | $42 in Oak | ||
|
|
The deep Single Angle Flush Mount wood coin display is approximately
7 inches front to back and 4 inches high.
 |
| SF616 in
Oak (16 inches wide) |
| Holds 54 standard 1-3/4"
coins plus 6 in
flush mounts Due to limited demand, these are stocked in limited quantities and may require additional processing time. |
| $47 in Oak |
|
|
The front of all three flush mount wood coin displays has space for an
engraved plate (not included) up to 2-7/8 inches high and 3-3/4 inches wide.
The backs of all Single Angle Flush Mount coin displays
and Single Angle wood coin displays are open,
allowing room for storage underneath the display.
Challenge Coins / Geocoins are not included.
More wood products coming.
Please check back.
All photos and designs are owned by Brad Hancock